F2x64 GPRS RTU is wireless remote terminal unit(abbreviation:RTU). RTU has many functions (analog input,switch input,switch output,pulse counting and wireless data communication ect).
It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232 and RS485 (or RS422) port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC. It has compatible digital I/O channel, ADC, input pulse counter and pulse wave output function.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
2. Product Feature
Design for Industrial Application
High-powered industrial cellular module
High-powered industrial 32 bits CPU
Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function
Housing: iron, providing IP30 protection.
Power range: DC 5~35V
Stability and Reliability
Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
RS232/RS485/RS422 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
Antenna port: lightning protection(optional)
Standard and Convenience
Adopt terminal block interface, convenient for industrial application
Support standard RS232 and RS485(or RS422) port that can connect to serial devices directly
TTL logic level RS232 interface can be customized
Support intellectual mode, enter into communication state automatically when powered
Provide management software for remote management
Support several work modes
Connvenient configuration and maintenance interface
8 ch acquisition analog input(resolution:16bit)Input voltage(0-5V),Input current(0-20mA), Sampling rate(1.365kSPS),Accuracy ±0.5% or better
8 ch Digital input(“0”:0-3.3V,“1”:5-24V) Contains all the way count function (1KHz)
2MB SPI FLASH
Support double data centers, one main and another backup
Support multi data centers and it can support 5 data centers at the same time
Support multi-center multi-function(for example: a data center is MODBUS RTU protocol function, another data center is RTU extended protocol function)
Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
Support dynamic domain name(DDNS) and IP access to data center
Support RS232/RS485 MODBUS RTU protocol.
Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to virtual serial
Support the function that 8-way digital input and 8-wat analog input(analog input are actual data, it means that customers do not need to be translated) are queried by MODBUS RTU protocol.
Support the function that 4-channel optocoupler output and 4-channel relay output are controlled by MODBUS RTU protocol
Support the function that the initial value of the timer is set and the value of the timer is queried by MODBUS RTU protocol
Support RTU extended protocol. Unified protocol format that customers develop easy
Support RTU extended protocol. Acquisition data(8-channel analog input and 8-channel digital input) are reported periodically
Support RTU extended protocol. Reporting mode can be selected. there are three reporting mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when network connect fail)
Support RTU extended protocol.When reporting acquisition data failure, acquisition data are saved to 2M byte SPI FALSH that power-down can save a lot of acquisition data
Support RTU extended protocol. The data center can query acquisition data actively
Support RTU extended protocol. It has counter function that the initial value of the timer is set and the value of the timer is queried
Support RTU extended protocol. It has the data center and RS232/RS485 transparent transmission function
Support RTU extended protocol. it has alarm function that alarm information is reported(alarm trigger conditions can be set independently).
Support RTU extended protocol. Can remotely reboot equipment
Support RTU extended protocol. Can remotely configure the parameters
Support RTU extended protocol. The remote upgrading parameters can be set, as well as rtu is remotely upgrading
Alarm function. Alarm information are reported through RTU extended protocol only, SMS only and both SMS and RTU extended protocol
• Support RTU extended protocol. Reporting mode can be selected. there are three reporting mode, including Network only, SMS only and Main network SMS backup(it uses SMS. when network connect fail) • Support TCP MODBUS RTU protocol using TCP2COM software that converts TCP to virtual serial port • TTL logic level RS232 interface can be customized • Support 8 digital inputs and 8 analog input manual query and automatic report • Provide management software for remote management
Product Description for 4g 3g cdma scada plc gprs gsm modbus remote terminal unit rtu
RS232/RS485, 8*AI, 8*DI
Iron, providing IP30 protection
“Power”, “ACT”, "Online”
Power Adapter, RS232 serial cable,Celluar Antenna.
Detailed Images for 4g 3g cdma scada plc gprs gsm modbus remote terminal unit rtu
Acquisition and Transmission Integrated Design,Higher Cost Performance
Acquisition and Transmission Integrated Design,Higher Stability and Reliability
Standard and Convenience
Synchronous Transmission of Multi Data Centers
Product Solution for 3g 4g rs485 rs232 analog input RTU
We provide loT solutions for various vertical markets including Smart Grid, Industrial Automation,